Menu
Call (331) 716-1355
Chimney Parts

Chase Cover Replacement Winfield, IL

The chase cover on a Winfield home with a factory-built fireplace can be swapped for one that sheds water sized to the chase and shaped to shed water off the edges. Dial (331) 716-1355 to talk with a local chimney pro about your chase.

A chase is the boxed enclosure on the outside of a house that hides a factory-built chimney pipe, usually framed in wood and finished with siding or stone veneer. The chase cover, sometimes called a chase top or chase pan, is the metal sheet that caps the top of that enclosure. Everything inside the chase depends on that cover staying watertight.

Builder grade chase covers are usually galvanized steel cut flat across the top. Water pools on a flat galvanized top until rust sets in, and then it leaks. Rust running down the chase is usually the first clue.

Water that gets past the cover can do real damage inside the chase. Rotted framing, wet insulation, rusted firebox parts and water stains inside the house are all common results. Replacing the cover early is far easier than repairing a rotted chase.

Depending on what the sweep finds, chase cover replacement in Winfield, IL can go hand in hand with chimney cap installation and chimney leak repair.

Need chase cover replacement in Winfield? Call (331) 716-1355 and describe the problem to a chimney sweep who works in Winfield.

Call now
The process

What happens during a chase cover replacement

Replacing a chase cover is mostly about getting the fit right.

  1. Inspect the chase

    The sweep checks the old cover, the storm collar, the cap and the siding near the top. Damage below the cover may need repair before the new cover goes on.

  2. Measure the chase

    Exact measurements are taken so the new cover fits snugly. Most replacement covers are made to order.

  3. Remove the old cover

    The cap comes off first, then the old cover is unscrewed and lifted away. The framing below is checked once it is exposed.

  4. Set the cover

    A sloped stainless or copper cover is fitted and fastened through the side skirt. It is fastened through the skirt, not through the top.

  5. Seal the collar

    A sealed storm collar and cap close up the opening at the flue. The sweep makes sure water has nowhere to get in.

What is included

Chase cover work

Sloped tops

Shaped tops shed water instead of holding it so rust has less chance to start.

Stainless steel chase covers

Stainless steel is the most common replacement material and do not leave rust streaks.

Copper tops

Copper is a long lasting option for homes where looks matter.

Storm collars

Collars and caps are checked and replaced as needed for a complete watertight top.

Drip edges

A hemmed drip edge on the skirt kicks water away from the siding instead of soaking into it.

Related service

Chimney Chase Repair Winfield, IL

When a chase cover has leaked for a while, the chase itself often needs repair too. Rotted studs, soft plywood, damaged siding and soaked insulation are the usual problems. Leaks can come from the roof line as well, so the flashing gets a look.

Calling (331) 716-1355 from Winfield with details about stains or leaks helps the sweep plan the visit. Some chase repairs need carpentry, so ask how that work is handled. Fixing the cover without fixing rot underneath only delays the problem.

Local help

Chase Cover Replacement Near Me

Around Winfield, flat galvanized chase covers are a common source of leaks and rust stains. In Winfield and places nearby like Wheaton, Carol Stream, West Chicago and Warrenville, snow and rain sitting on flat chase tops speed up rust, which is why a chase cover is worth checking when the chimney is swept.

Searching for chase cover replacement near me from Winfield or Wheaton, Carol Stream, West Chicago and Warrenville? Call (331) 716-1355 to talk to a chimney sweep who works in your part of town.

Chimneys in this climate

Winters here are cold and long, with lake effect snow in many towns and deep cold snaps that can last for days. Furnaces, wood stoves and fireplaces run hard from fall to spring, so flues collect creosote fast and liners and crowns see a lot of heat and cold. Snow drifting against the back of a chimney melts slowly and works water under tired flashing. Most chimney cleaning in Winfield, IL happens right before the first snow.

Why call

Why fix it now

Safer fires

A chimney problem fixed early rarely spreads to the masonry, the liner or the house.

Local knowledge

Local sweeps see the same chimney types and weather wear across Winfield and nearby towns.

Straight answers

Ask your questions before you agree to anything.

Common questions about chase cover replacement

Why is there water in my prefab fireplace?
A failed chase cover is one of the most common causes of water in a factory-built fireplace. It can lead to rust, damaged panels and stains around the fireplace. The sweep will check the cover, collar and cap to find the source.
Can a leaking chase cover be repaired?
Patching a rusted chase cover is usually a short term fix. Most sweeps recommend replacement once rust has set in. Any rot underneath should be repaired at the same time.
Why is my chase cover rusting?
Rust usually comes from a galvanized cover that has started to break down. Flat covers make it worse, since standing water sits on the metal. That rust washes down and stains the siding below.
How long does a stainless steel chase cover last?
Quality covers in stainless or copper hold up for a long time. A sloped design and drip edge help it last by keeping water moving. Have it checked during chimney sweeping.
What is a chase cover?
The chase cover is the metal sheet that seals the top of a chimney chase, with an opening for the flue pipe. It keeps rain and snow out of the chase, which protects the framing and the fireplace below. A cap sits on top of the flue pipe that comes through the cover.

More questions? Call (331) 716-1355

Related services

  • Chimney Cap Installation

    Installing chimney caps with mesh sides so water, birds and debris stay out of the flue.

    Learn more
  • Chimney Leak Repair

    Finding and stopping water that gets in through the crown, cap, flashing or brick, instead of patching the stain on the ceiling.

    Learn more
  • Chimney Waterproofing

    Treating chimney brick and mortar with a breathable water repellent, as the last step in keeping a chimney dry.

    Learn more
  • Chimney Repair

    Chimney repairs from the cap and crown down to the firebox, so the chimney stays dry and safe to use.

    Learn more

Looking for something else?

See all chimney services

Get chase cover replacement help in Winfield

Call now for Winfield chase cover replacement and help in the towns around it.

(331) 716-1355

Free to call. No forms to fill out.

Call (331) 716-1355